Description
PART A ONLY
- Advanced acrylic polymers – will not re-emulsify
- Rapid drying time, normally ready to tile in 16-24 hours
- Class III two component cementitious membrane that conforms to AS4858:2004 Wet Area Membrane (Ref: CSIRO Report 3879)
- Compatible with ARDEX tile adhesives
- Fibre reinforced – no need for reinforcing mat
- Low VOC content – meets Green Building Council of Australia Green Star IEQ-13 requirements
- Concrete, renders and screeds
Wet area compatible fibre-cement sheet, plywood and plasterboard
Substrates:
Concrete
Renders and screeds
Fibre cement
Plasterboard
Plywood
Particleboard
Permanent immersion
Location:
Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic.
Suitable for permanent immersion.
Location:
Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic
Suitable for permanent immersion.
Colours:
Liquid – White
Coverage:
40kg unit covers approx 16m2 to 24m2 (2 coats)
Floors 16m2 (2 coats) D.F.T. – 1.2mm
Walls 24m2 (2 coats) D.F.T. – 0.8mm
Drying Times:
Recoat time: 1-2 hrs
Ready to tile: 16-24 hrs
Full cure: 3 days
Pack Size:
20kg liquid
